Google Ads

 
Shopping Cart
0 items
 

Google Ads

 

Mini USB 10pin microphone input connector with cover and PCB with resistor


Click to enlarge
Price: US$4.99
Availability: In Stock
Model: USBMIC
Average Rating: Not Rated

Available Options:
Include wires:
Strafin relief:
Go Back

Mini USB connector for mic input and +5V external power supply.  This is a angled 10pin mini USB connector with a PCB attached that has an ID resistor to activate microphone input on the GoPro 3/4 and has soldering pads for Mic In 1 and 2, Vout and at the bottom side PWR (+5V input) and GND.  The PCB makes it much easier to solder wires to the connector and the resistor is already assembled.

As option, you can select a 3 or 4 wire cable with a crimped AMP Mini CT connector (see additional pictures).  These wires come unsoldered and are 15cm long (except if otherwise stated).  For soldering instructions see our blog at http://chargeconverter.com/blog/?p=214 .  Wire colours may differ from the pictures.

The connector cover has two small snap locks that easily breaks (either if you try to open the cover again or it might happen during shipment, even they are packed in containers).  This doesn't matter so much, as the cover will be held together with some additional internal clips as well and anyhow, we recommend that you fill the cover with hot glue or similar to provide strain relief.  We do not replace covers there these clips are broken, as they are not really important.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: