USB-C connector plug
A USB-C connector with a small PCB with solder pads to connect GND, Power and USB 2.0 D-/D+ data pins. The PCB is equipped with a 56k resistor to configure the Power pins as USB 2.0 power but can easily be exchanged for other power modes. Comes with a white plastic cover and strain relief. I recommend to fill the cover with glue.
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: