M. iPod Breakout/Extender PCB. If you want to experiment with the iPod dock connector or just want to extend the connector a couple of centimeters (about 2 inches), then this PCB might be what you are looking for. You can mount one male connector and/or one female connector on the PCB. On the edges of the PCB all the connector pins are routed for easy access and easy soldering or measuring or for mounting standard pin headers. If you are mounting just one connector on the PCB, you can use it as a breakout tool to check different signals in the connector. If you mount both a male and female connector on the PCB, you can use the PCB as an extender for the dock connector or to spy on signals between the iPod and a device connected to the dock connector. This item does NOT INCLUDE THE CONNECTORS, just the PCB. The connectors can be ordered at the same time from this page (connectors D and K are suitable). Soldering of the female connector (for extender or spy purposes) requires good soldering skill/tools (surface mounted) while the male dock connector (for iPod breakout PCB) requires normal soldering skill. $12.90 X. iPod Breakout/Extender PCB with 1 soldered connector. This is like the M. breakout/extender PCB to the left, but ready soldered with one male connector. $34.90 W. iPod Breakout/Extender PCB with 2 soldered connectors. This is like the M. breakout/extender PCB to the left, but ready soldered with one male and one female connector. $59.90 Sk. Spreader PCB. This is a PCB that takes one male and one female connector to make a short extender. Soldering the female connector requires good soldering skill/tools. $9.90 Ws. iPod short extender PCB with 2 soldered connectors. This is like the Sk Spreader PCB (to the left), but ready soldered with one male and one female connector to make a complete extender. $59.90 Ma. Short extender 90 degree angle PCB. This is a PCB that takes one male and one female connector to make a short 90 degree extender. Soldering the female connector requires good soldering skill/tools. $9.90 Ms. Short extender 90 degree angle PCB fully with 2 soldered connectors. This is like the Ms short extender 90 degree angle PCB (to the left), but ready soldered with one male and one female connector to make a complete 90 degree extender. $59.90 Zr. iPod extension cable. This extension cable is 1m (3.3 feet) long and works for most applications and works together with our charge converters. Maybe you can't fit your favourite accessory into the iPod because of a case? Do you have a Bose Sounddock that your iPod doesn't fit into because of the case? Use this extender to connect the iPod through a cable and put the iPod down at the table instead. US$ 19.90 Yc. iPod dock extender. If you want to extend the iPod dock connector just a little. Maybe you can't fit your favourite accessory into the iPod because of a case? Unlike some other solutions, this extender extends ALL used connections on the iPod dock connector. If you want black colour, please add a comment about that with your order, otherwise we will ship white. US$ 59.90 Y. iPod dock extender. This extender does the same as the Yc extender above. It is just another design. If you want black, please specify so in a comment with your order, otherwise we will ship white. US$ 59.90 Z. iPod dock extender cable. If you want to extend the iPod dock connector a little bit more. Unlike some other extender cables, this extender extends ALL used connections on the iPod dock connector. If you want spare cables, they are available separately further down (easy to exchange). US$ 69.90 Ykit. iPod dock extender DIY kit. If you want to extend the iPod dock connector just a little. Maybe you can't fit your favourite accessory into the iPod because of a case? Unlike some other solutions, this extender extends ALL used connections on the iPod dock connector. This DIY kit includes a PCB and the connectors necessary to build this extender. Note that it requires good soldering skill. US$ 19.90 Zkit. iPod dock extender cable DIY kit. If you want to extend the iPod dock connector a little bit more. Maybe you can't fit your favourite accessory into the iPod because of a case? Do you have a Bose Sounddock that your iPod doesn't fit into because of the case? Use this extender to connect the iPod through a cable and put the iPod down at the table instead. Unlike some other solutions, this extender extends ALL used connections on the iPod dock connector. This DIY kit includes two PCBs, a 20cm (around 8") cable and the connectors necessary to build this extender. If you want spare cables, they are available separately further down. Note that this kit requires good soldering skill. Click here for mounting instructions. US$ 34.90 30pin 0.5mm pitch FPC connector. This is a PCB surface mounted 30 pin connector with 0.5mm pitch for ZIF (zero insertion force) flexible flat cable. This connector can be soldered in the same place as the surface mounted iPod connectors and thus allow you to connect a ribbon cable. Bottom contact. $0.99 20cm (around 8") 30wire flexible flat cable. Spare cable for the extension cable above. $0.99 WP. iPod power dock extender. Do you have an accessory (like a car/cassette interface or FM transmitter) that connects to the dock connector, but want to charge the iPod at the same time? Then this part is for you. It can also be used for emergency charging the iPod with an ordinary 9V block battery (this does not work with the iPhone 3g). You should also consider the charge converter. If you want to build this item by yourself, you can just buy the Ykit extender and get a suitable DC connector. $64.90 SPI. iPod dock connector splitter isolated. The same as the SP to the left, but with black isolating cover/skin (shrink tube). $84.90